HP 5400ZL - Manual (Page 401)

QinQ (Provider Bridging)
Event Log Messages and SNMP Support
MIB Object Notes and Descriptions
hpicfProviderBridgePortTable Used to configure each port as a ‘provider’ or ‘customer’.
This MIB object is only relevant when the device is QinQ
enabled. On a non provider device (QinQ disabled), any SET
operation on this MIB object is disallowed and an ‘SNMP­
GET’ would not return any entry.
hpicfProviderBridgePortEntry Used to specify the designated type of an externally
accessible port on a Provider Bridge. These include the
following options:
• customer-edge port (reserved for future use);
• customer-network port: an S-VLAN component port on a
provider bridge or within a provider edge bridge that
receives and transmits frame for a single customer.
• provider-network port: an S-VLAN component port on a
provider bridge that can transmit and receive frames for
multiple customers.
8-35