System operation 3-116 – Honeywell GNS-XL User Manual
Page 234
System Operation
3-116
GNS-X
L
Flight Management System
Rev. 0
Oct/96
4.
ENT Key - DEPRESS to select option. (Figure 3-185)
NOTE: To display numbers
when the DIS option is
selected, a Flight Plan must
be selected and a leg
defined. To display numbers
when the ETE or ETA option
is selected, a valid ground
speed is required. Altitude
constraints and waypoint off-
sets are only displayed if
programmed.
SELECTING NAV PAGE
ETA OR ALT DISPLAY
OPTION (NAV Page 1, 2,
or 3)
The pilot can view the esti-
mated time of arrival or alti-
tude constraint of TO way-
point on the NAV Pages.
Selecting ALT Display:
1.
NAV Key - DEPRESS to
display the NAVIGA-
TION Page.
2.
Line Select Key -
DEPRESS to position
the cursor over the ETA
field. (Figure 3-186)
3.
BACK Key - DEPRESS.
ALT? appears in cursor.
4.
ENT Key - DEPRESS to
display Altitude
Constraint. (Figure 3-
187)
NOTE: Altitude constraint and waypoint offset are only displayed if a
VNAV Waypoint is programmed at the TO Waypoint and VNAV is
valid. The altitude cannot be changed on these pages. The ALT dis-
play should always be selected during SID, STAR, or Approach pro-
cedures.
<
<
<
<
FR RW19R
1
TO ORD
00:42
2
AZO
00:16
3
KDTW
01:11
4
######
DEPART
ARRIVE
ETE
APPROACH
ERASE
>
>
ACTIVE FPL
1/1
Figure 3-185
DIRECT
23:03
TO BDF
05:22
DIS
1328.5
ETE
18:59
DTK
049
GS
228
WIND
230/ 8
-AUTO-
NAVIGATION 1/4
<
<
>
>
>
Figure 3-186
DIRECT
23:03
TO BDF
12000G
DIS
1328.5
ETE
05:46.3
DTK
049
GS
228
WIND
230/ 8
-AUTO-
NAVIGATION 1/4
<
<
>
>
>
Figure 3-187