Printing images – HP 930 User Manual

Page 68

Advertising

hp photosmart 930 series user’s manual

NOTE

If your computer is running Windows XP, when you

turn on the camera in the next step, a dialog box will

display that requests you to

Select the program to

launch for this action

. Simply click on

Cancel

to close

this dialog box.

Turn on the camera. The HP Image Unload software will

launch on your computer. If you have set the software to

automatically unload the images in the camera, the images

will automatically unload to the computer. Otherwise, in the

Welcome

screen, click

Start Unload

. If there were any

images in the camera that were selected in the

for printing or e-mail, those actions are started after the

images have been unloaded to the computer.

When the unload screen on the computer says

Finished

your images have been saved and shared. You can now

disconnect the camera from the computer.

NOTE

To unload images to a computer that does not have the

HP Photo & Imaging software installed on it, change the

USB Configuration

setting to

Disk Drive

in the

Setup

menu.

See

USB configuration

on page 72. This allows the

camera to appear as another disk drive on the computer

so that you can easily copy the image files from the

camera to the hard drive of your computer.

Printing images

To print images that have been unloaded to the computer, you

can use the HP Photo & Imaging software that was shipped

with the camera.
You can also connect the camera directly to any HP Photosmart

printer or to any other HP printer with a front panel USB port,

then print images selected from the camera

menu or all

images in the camera.

Advertising