HP DS20L - Manual (Page 37)

Installation and Options 2-9
Figure 2-7 Adding or Removing a PCI Module
4
2
5
1
3
MR0367
2.3.4 Hard Drive
Follow these steps to add or remove a SCSI hard drive.
1. Remove the front bezel (see Section 2.2.1) and cover (Section 2.3.1).
2. See Figure 2-8. Install the SCSI hard drive backplane
X
(part of CK-
DS20L-AA SCSI cable kit) onto its connector on the back of the SCSI hard
drive. Attach the power cable connector
Y
, and one end of the data cable to
the backplane
Z
.