HP DS20L - Manual (Page 56)

3-12 AlphaServer DS20L User’s Guide
3.2.2 Booting Tru64 UNIX
Tru64 UNIX can be booted from a local disk or from a Remote
Installation
Services (RIS) server over a local area network.
To boot from a RIS server, you must first register your system as a RIS client.
Refer to the Tru64 UNIX Sharing Software on a Local Area Network manual for
information about setting up and using RIS and the Tru64 UNIX Installation
Guide - Advanced Topics manual for information about installing Tru64 UNIX
from a RIS server.
3.2.2.1 Booting from a Local Disk
Example 3– 2 Booting Tru64 UNIX from a Local Disk
P00>>> sh boot*
X
boot_dev dkb0.0.0.5.0
boot_file
boot_osflags A
boot_reset OFF
bootbios
bootdef_dev dkb0.0.0.5.0
booted_dev
booted_file
booted_osflags
P00>>> show device
Y
dkb0.0.0.5.0 DKB0 COMPAQ BF01865222 B004
Z
dqb0.0.1.16.0 DQB0 SAMSUNG CD-ROM SN-124 q008
eia0.0.0.3.1 EIA0 00-02-56-00-08-7A
eib0.0.0.4.0 EIB0 00-02-56-00-08-79
pka0.7.0.3.0 PKA0 SCSI Bus ID 7
pkb0.7.0.5.0 PKB0 SCSI Bus ID 7
P00>>> b
[
(boot dkb0.0.0.5.0 -flags A)
block 0 of dkb0.0.0.5.0 is a valid boot block
reading 14 blocks from dkb0.0.0.5.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1c00
initializing HWRPB at 2000
initializing page table at 1ff4a000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
.
The system is ready.
Compaq Tru64 UNIX V5.1A (Rev. 1885) (hpsq5) console
\
login: