MK Diamond Products MK CX-3 - Manual (Page 28)

MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 28
MAINTENANCE AND TROUBLESHOOTING
9. Engine Air Filter Inspection Cleaning and Replacement:
(H)
Fill the Oil Reservoir (See
Checking Oil Level for
filling instructions)
(G)
Using two 1/2 – inch or adjustable
wrenches, install the Drain Cap onto
the Oil Drain Line (Ensure the Cap
is tight)
(F)
Clean the Foam Filter with warm
soapy water – allow to air dry
(E)
Separate the outer Foam Filter from
the inner Paper Filter
(B)
Remove the Dual Air Filter
Retaining Wing nut
(A)
Remove the Air Filter Cover
Turn counter-
clockwise to
loosen
Clean Foam Filter
Wing Nut
Carburetor
Intake
Fill through Reservoir
oil level hole Wrench
Wrench
Air Filter Cover
Turn counter-
clockwise to
loosen
(C)
Remove the Dual Air Filter
(D)
Clean the Air Filter Base DO NOT
allow dirt to enter the carburetor
intake
Dual Air Filter
Filter Base Foam Filter
Paper Filter