IronPort Systems ZyAIR B-4000 - Manual (Page 178)

ZyAIR B-4000 Hot Spot Gateway
19-10 System Status
Table 19-5 SESSION LIST
LABEL DESCRIPTION
Page Select a page number from the drop-down list box to display the selected page.
First Click First to go to the first page.
Previous Click Previous to return to the previous page.
Next Click Next to go to the next page.
End Click End to go to the last page.
No This field displays the index number of an entry.
TCP/UDP This field displays the type of traffic (TCP or UDP).
IP Client This field displays the IP address of the client computer.
Port Client This field displays the port number through which the client computer transmits the traffic.
Port Fake This field displays the NAT port to and from which the ZyAIR maps the session’s traffic.
Remote IP This field displays the IP address of a remote device the client computer accesses.
Remote
Port This field displays the port number of a remote device the client computer accesses.
Idle This field displays how many seconds are left before the session times out if there is no
more traffic. The ZyAIR automatically times out idle TCP sessions after 5 minutes (300
seconds). The ZyAIR automatically times out idle UDP sessions after 1 minute (60
seconds).
19.8 LAN Devices
The SYSTEM STATUS LAN DEVICES screen displays the status of LAN devices configured in the
ADVANCED LAN DEVICES screen (refer to the LAN Devices chapter).
Click SYSTEM STATUS and LAN DEVICES to display the screen as shown next. This screen
automatically updates every minute.