IronPort Systems ZyAIR B-4000 User Manual
Page 45
ZyAIR B-4000 Hot Spot Gateway
General System Setup 3-3
The following table describes the labels in this screen.
Table 3-1 SYSTEM
LABEL DESCRIPTION
System Name
Enter a descriptive name (up to 40 characters) for identification purposes.
Domain Name
Enter the domain name (if you know it) here. If you leave this field blank, the
ZyAIR may obtain a domain name from a DHCP server.
The domain name entered by you is given priority over the DHCP server assigned
domain name.
Location Information
Location Name
Enter the device’s geographical location.
Address
Enter the street address of the device’s location.
City
Enter the city of the device’s location.
State/Province
Enter the state or province of the device’s location.
ZIP/ Postal Code
Enter the zip code or postal code for the device’s location.
Country
Enter the country of the device’s location.
Contact Name
Enter the name of the person responsible for this device.
Contact Telephone
Enter the telephone number of the person responsible for this device.
Contact FAX
Enter the fax number of the person responsible for this device.
Contact Email
Enter the e-mail address of the person responsible for this device.
Date/Time
Set the system date and time by selecting the appropriate choices from the drop-
down list boxes.
Get from my Computer Click this button to set the time and date on the ZyAIR to be the same as the
management computer.
Get from NTP server
Click this button to set the time and date on the ZyAIR to be the same as the
management computer.
Use NTP (Network
Time Protocol) Time
Server
Select this check box to set the ZyAIR to get time and date information from an
NTP (Network Time Protocol) time server.
Server IP/Domain
Name
Enter the IP address or URL of your time server. Check with your ISP/network
administrator if you are unsure of this information.