IronPort Systems ZyAIR B-4000 - Manual (Page 58)

ZyAIR B-4000 Hot Spot Gateway
4-10 WAN, LAN and Server Setup
Table 4-2 SERVER
LABEL DESCRIPTION
DHCP Server
(Default) Select this option to set the ZyAIR to assign network information (IP address, DNS
information etc.) to Ethernet device(s) connected to the LAN port(s). This is the
default setting.
IP Pool Starting
Address
Enter the first of the continuous addresses in the IP address pool.
The default is 192.168.1.2.
DHCP Pool Size This field specifies the size or count of the IP address pool. Enter a number not
greater than 1024. The default is 253.
Lease Time Specify the time (in minutes between 1 and 71582788) a DHCP client is allowed to
use an assigned IP address. When the lease time expires, the DHCP client is given
a new, unused IP address.
Primary/Secondary
DNS Server
Enter the IP address of the DNS server(s) in the Primary DNS IP Address and/or
Secondary DNS IP Address fields.
You must specify a DNS server.
E-mail Server
Redirect
IP Address or Domain
Name Specify the IP address or the domain name of the e-mail server to which the ZyAIR
forwards e-mail.
SMTP Port Enter the port number (25, or between 2500 and 2599) for the mail server. The
default is 25.
Apply Click Apply to save the settings.