Intel SX220 User Manual
Page 29
Viglen SX220 User Guide
28
Installing the Server Board
Installing the server board consists of the following steps:
•
Removing the cover, Riser cards and fan assembly.
•
Mounting the server board in the chassis.
•
Cabling the server board to the other chassis components.
•
Adding processors and memory to the server board.
•
Replacing riser cards, fan assembly and the top cover.
Removing the Cover
1. While pressing the blue latch button (A) with your left thumb, slide the top cover
back using the heal of your right hand on the blue pad.
NOTE:
A non-skid surface or a stop behind the chassis may be needed if attempting
to remove the top cover on a flat surface.
2. Set the cover aside and away from the immediate work area.
Figure 8: Removing the Cover
Removing the Riser Cards
1. Grasp riser card (A) at both ends (C) of the EMI shield.