Intel SX220 - Manual (Page 91)

Viglen SX220 User Guide 90
Gateway IP Address
Enter the Logical or Internet Address of the router. The Gateway IP Address will
only be saved when DHCP is disabled. The IP is entered as a dotted IP, (e.g.,
192.168.0.2).
Subnet Mask
Enter the logical or Internet address of the host’s subnet. The server uses this to
decide if the alert destination is in the local subnet or in another subnet relative to the
server. The Subnet Mask will only be saved when DHCP is disabled. The IP is
entered as a dotted IP, e.g., 192.168.0.2
Alert IP Address
Enter the logical or Internet address of the Alert-Destination. In case of single node
destination, this is the unicast or specific IP address. This is the IP Subnet address if
the alert needs to be broadcast within a particular subnet. The Alert IP Address is
always saved. The IP is entered as a dotted IP, e.g., 192.168.0.2
Buttons
•
Save: Allows you to save the configuration immediately.
•
Close: Allows you to close the BMC LAN-Alert dialog without saving
changes. If changes have been made, you will be prompted to save
changes before closing.
•
Help: Displays help information.
Platform Event Action Dialog
These similar dialogs allow you to configure the Platform Event Action features for
PEP and BLA (See Figure 43). If an event is in the enabled listbox, it will generate
the appropriate action when it occurs. If an event is in the disabled listbox, it will not
generate an action when it occurs. Enable global action for events to generate
actions. This global flag is in the PEP or BLA dialogs as ‘Enable PEP’ or ‘Enable
BLA’ checkboxes.