ILY Enterprise CoolCopy 7 - Manual (Page 13)

Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
13
4.6 Prescan
Use the prescan function to scan if the source CD can be read correctly and also to test the
reading speed.
Select function 6. Put the source CD
into CD-ROM.
Press ENT to prescan, LCD will show the
scanning information as follows:
If the master of the disc can read correctly,
the source CD has no problems. LCD
will show the following:
If the master disc cannot be read correctly,
the LCD will show the message as follows:
4.7 Disc Info
Function 7, Disc Info, shows the basic information of the source CD.
Select Function 7. Insert source CD into CD-ROM.
Press the “ENT” button to show the disc information.
The LCD will show the total sessions and
tracks on the master disc.
Press the “ENT” button again, the LCD will show
the total time and capacity on the master disc
Press the “ENT” button again and use arrow button
to select the session, LCD will show the
information contained in the session.
Press the “ENT” button again and use arrow button
to select the track. The LCD will then show what
information is contained on the track.
4.8 Select Source
Function 8 Select Source will let you select the data on CD-ROM, CD writers or HDD as the
source from which you intend to copy.
6 . Prescan
Scaning-24X 0%
650 . 0MB 74 : 00
PreScan OK!
PreScan Fail!
7 . Disc Info
Total 02 Sessions
Total 10 Tracks
Total
: 74:00
Total : 650 MB
Session 01
Track 01 - 09
Track 01
AUDIO 03:54