IBM 31P6241 User Manual
Page 11
English - 9
Français
Español
Deutsch
Italiano
English
Portuguese
Troubleshooting
Before calling for service, check the information in this section to see if you can solve the
problem yourself.
There is no screen image
n
Check to see that both the monitor and the computer are plugged in and turned on.
“No Connection, Check Signal Cable” appears
n
Check the signal cable connection between the computer and the monitor.
“Sync. Out of Range” appears
n
The input signal frequency is over or under the synchronization range of the monitor, see
“Specifications” section.
The screen image is too light or too dark
n
Adjust the brightness or contrast settings, see On Screen Display section.
The screen image is too large or too small
n
Adjust the size settings, see H-size and V-Size On Screen Display section.
n
Adjust the Zoom setting, see On Screen Display section.
The colors are distorted with dark or shadowed areas
n
Activate the degauss feature, see On Screen Display section.
n
Adjust the color temperature, see On Screen Display section.
The power indicator light is blinking green
n
The monitor is using its power management system, see “PowerSaver” section.
You need the monitor driver software
n
Download the driver from the internet at http: //www.ibm.com/support
E54-4p.fm Page 9 Friday, January 5, 2001 12:58 PM