IBM 31P6241 - Manual (Page 3)

English - 2
Connecting Your Monitor
1 Turn off your computer and unplug the
power cord.
2 Signal cable
Connect the end of the signal cable to
your computer’s video port (Video board,
video card, or graphics card).
3 Power port
Connect the power cord for your monitor
to the power port on the back of the
monitor.
4 Power cords
Plug the power cord for the monitor and
the power cord for your computer into a
nearby outlet.
5 Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
6 Install monitor driver
•
Insert the provided diskette into the A:
drive, when prompted by the operating
system.
3
2
4
Your New Monitor
Kerr15_main_1.fm Page 2 Wednesday, September 5, 2001 6:16 PM