ILY Enterprise 3 - Manual (Page 20)

Copyright©2005 ILY Enterprise, Inc. All rights reserved. 20
speed then press ENT. The default is maximum. Other
choices are 32X, 16X and 8X.
4.11.4 Auto Start Drive
This function automatically tests or copies once you put the blanks discs into the writers.
Press the ENT button to enter Auto Start Drive.
Use the arrow button to change either the number or the
“Off” setting. Then press ENT or ESC to
go back to the 11-04 menu.
4.11.5 Start up menu
This setting lets you select any one of the functions, except Adv Setup, as the first item to appear
on the menu when you turn on your device.
Press ESC button to enter Startup Menu and
ENT to enter the following figure:
Use the arrow button to select other function setting, which would
be the first setting to appear when device is turned on.
Then press ENT.
4.11.6 Auto Verify
This setting allows you to automatically verify if target DVDs can be read after copying.
Press the ENT button to enter the following figure:
Use arrow button to change “On” or “Off”
setting. Then press ENT or press ESC to
return to the 11-06 menu.
4.11.7 Auto Compare
This setting allows you to automatically compare the source DVD
and target DVDs after copying. Press ESC button and arrow
to enter the setting.
Use the arrow button to change the “On” or “Off” setting.
Then press ENT to go back to the 11-07 menu.
11-04. Setup
Auto Start
Drive
Auto Start
Drive
Off
11-05. Setup
Startup Menu
Startup Menu
1.Copy
11-06. Setup
Auto Verify
Auto Verify
Off
11-07. Setup
Auto Compare
Auto Compare
Off