ILY Enterprise 3 - Manual (Page 24)

Copyright©2005 ILY Enterprise, Inc. All rights reserved. 24
LCD will show the information as the following screen:
When finished, the LCD will show the following message:
4.12 Adv Setup
This function allows you to change the system configuration. Changes should be made only when
you are fully familiar with the function. To enter the function, please press “ESC” button for 2
seconds.
4.12.1 UnderRun Protect
This function lets you control the Buffer Under Run Protection settings, such as Burn Proof,
SafeBurn, JustLink, Seamless Link, etc.
Press the ENT button to enter UnderRun Protect.
Use the arrow button to change the Setting. Then
press ENT or ESC to return to the 12-01 menu.
4.12.2 Overburn
This setting lets you decide whether to copy beyond the limit of the DVD or not.
Press the ENT button to enter Overburn.
Use the arrow button to change the On or Off
setting. Then press ENT or ESC to return to the
12-02 menu.
4.12.3 Read Error Skip
This function allows you to neglect any error that occurs during copying. You can use this function
to copy some defective DVDs.
Press the ENT button to enter Read Error Skip.
Use the arrow button to change the setting. Then
press ENT or ESC to go back to the 12-03 menu.
4.12.4 Format Hard Disk
This function allows you to partition the hard drive.
Erasing disc
03:24 (Full)
Full Erase
OK:01 Fail:00
12-01. Adv Setup
UnderRun Protect
UnderRun Protect
On
12-02. Adv Setup
Overburn
Overburn
On
12-03. Adv Setup
Read Error Skip
Read Error Skip
Off
12-04. Adv Setup
Format HDD