I-Data 812-1x MIO - Manual (Page 23)

ida 812-1x MIO Operator’s Guide
Front Panel Seup
-23-
5.1.1. Navigation Keys
The following guidelines apply after you have entered the Main
Menu for ida 812-1x setup (See navigation chart above). The keys
you use to navigate vary slightly depending on the printer; e.g.:
To go to next Menu on HP LaserJet IIISi, you press MENU key,
whereas you use ITEM key to do the same on the HP LaserJet 4,
4 Plus, 4Si, 5, 5Si, 4V and HP Color LaserJet.
HP LaserJet IIISi:
Go from ida 812-1x Setup Menu to Non-IPDS Menu:
Press ENTER key
Go to next Menu (IPDS Menu):
Press MENU key
Change settings:
Use + and - keys
Mark with an asterisk *:
Press ENTER
Go to next setting:
Press MENU
Save settings:
After change of settings, you toggle to SAVE MENU using MENU
key and press ENTER.
SAVE SETT.= NO* will appear in the display. To select YES, you
press + or - key. When YES appears, you press ENTER to mark
YES with an *.
Press ONLINE (se NOTE above).
HP LaserJet 4, 4 Plus, 4V, 4Si, 5, 5Si and HP Color LaserJet:
To go from ida 812-1x Setup Menu to Non-IPDS Menu:
Press ENTER key
Go to next Menu (IPDS Menu):
Press ITEM key
Change settings:
Use + and - keys