JAI AD-081GE - Manual (Page 32)

AD-081GE
31
1. Type in the frame rate of the
connected camera.
AD-081GE operates at 30 fps.
2. Set the bandwidth at 80%.
3. Click the calculation tab.
4. New value is calculated.
5. Click OK. The value shown is
automatically transferred to the Packet
Delay column of the Control Tool.
10.2.8 Confirm the Filter Driver is used

The filter driver is installed as an optional function when JAI SDK is installed. If the filter
driver is not installed at that time, it can be installed from, All Programs ⇒ JAI SDK ⇒
GigE Vision Filter Driver ⇒ Install GigE Vision Filter Driver.

If the Filter Driver is installed properly, the Camera Control Tool indicates “Driver Type
Filter Driver” in the Network Interface.



