J. T. Eaton Liquid-Cooled Drives LCX9000 - Manual (Page 79)

LCX9000 Liquid-Cooled Drives User Manual
MN04005001E For more information visit: www.EatonElectrical.com 5-3
January 2007
Status LEDs (Green – Green – Red)
The status LEDs light up in connection with the READY, RUN and FAULT drive status
indicators.
Table 5-3: Status LEDs (Green – Green – Red)
Text Lines
The three text lines provide the users with information on their present location in the keypad
menu structure as well as with information related to the operation of the drive.
Table 5-4: Text Lines
Keypad Pushbuttons
The alphanumeric control keypad has nine pushbuttons that are used for controlling the
drive (and motor), setting parameters and monitoring values.
Figure 5-2: Keypad Pushbuttons
Indicator Description
Lights up with the AC power connected to the drive. Simultaneously, the
drive status indicator READY is lit up.
Lights up when the drive is running. Blinks when the STOP button has been
pushed and the drive is ramping down.
Lights up when unsafe operating conditions were encountered due to which
the drive was stopped (Fault Trip). Simultaneously, the drive status indicator
FAULT blinks on the display and the fault description can be seen, see
Page 5-11, Active faults.
Indicator Description
Location indicator: displays the symbol and number of the menu, parameter,
etc. Example: M2 = Menu 2 (Parameters); P2.1.3 = Acceleration time.
Description line: Displays the description of the menu, value or fault.
Value line: Displays the numerical and textual values of references,
parameters, etc. and the number of submenus available in each menu.