Jameco Electronics Rabbit 3000 - Manual (Page 227)

218 Rabbit 3000 Microprocessor
The following memory read time delays were measured.
The measurements were taken at the 50% points under the following conditions.
• T = -40°C to 85°C, V = 3.3 V
• Internal clock to nonloaded CLK pin delay
≤ 1 ns @ 85°C/3.0 V
The following memory write time delays were measured.
The measurements were taken at the 50% points under the same conditions that the mem-
ory read delays were measured.
See Table 16-2 for delays at other voltages.
Table 16-3. Memory Read Time Delays
Time Delay
Output Capacitance
30 pF 60 pF 90 pF
Max. clock to address delay (T
adr
) 6 ns 8 ns 11 ns
Max. clock to memory chip select delay (T
CSx
) 6 ns 8 ns 11 ns
Max. clock to memory read strobe delay (T
OEx
) 6 ns 8 ns 11 ns
Min. data setup time (T
setup
) 1 ns
Min. data hold time (T
hold
) 0 ns
Table 16-4. Memory Write Time Delays
Time Delay
Output Capacitance
30 pF 60 pF 90 pF
Max. clock to address delay (T
adr
) 6 ns 8 ns 11 ns
Max. clock to memory chip select delay (T
CSx
) 6 ns 8 ns 11 ns
Max. clock to memory write strobe delay (T
WEx
) 6 ns 8 ns 11 ns
Max. high Z to data valid rel. to clock (T
DHZV
) 10 ns 12 ns 15 ns
Max. data valid to high Z rel. to clock (T
DVHZ
) 10 ns 12 ns 15 ns