Standard Horizon QUANTUM Series GX3500S - Manual (Page 14)

GX3500S Page 14
8.7 CHANGING THE TIME LOCATION
You may select the time display between local time and UTC (time GPS sends
to radio). Time is displayed when GPS position (LAT/LON) is displayed by press-
ing the [F] key followed by the [6(NAV)] key.
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ Time Disp ” in the
“ Radio Setup ” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
UTC ” or
“ Local .”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
In the local time mode, the display shows the time by the 12-hour system.
Meanwhile, the display shows the time by the 24-hour system in the UTC mode.
(“UTC” mode) (“LOCAL” mode)