Standard Horizon QUANTUM Series GX3500S - Manual (Page 74)

GX3500S Page 74
13.4 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “10
DIGITAL SELECTIVE CALLING” and section “12 RADIO SETUP” for details).
The
LAMP , CONTRAST , and KEY BEEP menu item accessed from the RAM+
only controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [CALL/SET] key until “
RADIO SETUP ” menu ap-
pears.
2. Press the [ ]/[ ] key to select “ RADIO SETUP ” or “ DSC SETUP ” menu.
3. Press the [CALL/SET] key, then select the menu item you wish to work on
by pressing the [ ]/[ ] key.
4. Press the [CALL/SET] key.
5. Press the [
]/[ ] key to change the value or condition for the menu item,
then press the [CALL/SET] key to save the new setting.
6. Press the [ ]/[ ] key to select “ EXIT ,” then press the [CALL/SET] key to
return to the normal operation.
RADIO SETUP-menu DSC SETUP-menu