Standard Horizon QUANTUM Series GX3500S - Manual (Page 29)

Page 29 GX3500S
10.12 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Pri-
ority scan” scans the channels programmed in memory with the priority chan-
nel.
10.12.1 Selecting the Scan Type
1. Press and hold down the [CALL(MENU)] key until
“ Radio Setup ” menu appears.
2. Press the [ENT] key, then select “ SCAN Type ” in the
“ Radio Setup ” menu with the CHANNEL selector
knob.
3. Press the [ENT] key.
4. Turn the CHANNEL selector knob to select “
Prior-
ity ” or “ Memory .”
5. Press the [ENT] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [16/9] key.
10.12.2 Memory Scanning (M-SCAN)
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
CHANNEL selector knob. Press the [F] key followed
by the [2(MEM)] key, “MEM” will appear on the LCD
which indicates the channel has been programmed
into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
then press the [F] key followed by the [2(MEM)] key, “MEM” will disappear
in the LCD.
5. To start scanning, press the [F] key followed by the
[3(SCAN)] key.
“
M-SCAN ” appears on the LCD. Scanning will pro-
ceed from the lowest to the highest programmed
channel number and will stop on a channel when a transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the [16/9], [WX], [CALL(MENU)], or PTT key.