Symbol Technologies WS 2000 - Manual (Page 123)

A Field Office Example
Setting Up Network Address Translation
After entering the IP addresses for the WAN interface, Leo clicks the “+” left of the WAN
item in the left menu to expand it. He then selects the NAT item. The WS 2000 displays the
three IP addresses he entered when configuring the WAN.
Each of these IP addresses will serve as the alias for all of the traffic from its corresponding
subnet. It will serve as the only alias for many internal-only IP addresses. Leo chooses 1 to
Many from the pull-down menu to the right of each IP number. As he does so, a NAT
Ranges button appears to the right of the pull-down menus, in the Outbound Mappings
column.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 123
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004