Symbol Technologies WS 2000 - Manual (Page 98)

Retail Use Cases
If corporate had not paid their ISP for a static IP address for each store, she would have
selected the This interface is a DHCP Client option and the WAN configuration
information would have been assigned by the ISP each time they connected to the Internet.
Clarisa clicks the Apply button to save her changes.
Configuring Network Address Translation (NAT)
Clarisa has only one public IP address for the whole store. She will use network address
translation to make all request from the internal IP addresses to appear as if they came from
the single public IP address.
She selects the NAT node under the WAN item in the left menu. The screen shows all IP
addresses assigned to the switch in the WAN interface configuration step. In this case, there
is one IP address shown. She selects 1 to Many from the NAT Type menu to the right of
the IP address.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 98
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004