Symbol Technologies WS 2000 - Manual (Page 91)

Retail Use Cases
Clarisa clicks the Apply button to save her changes.
Clarisa leaves the rest of the System Configuration screens for now, moves to the left menu,
and clicks the “+” to the left of Network Configuration so that she can begin to define the
subnets.
Configuring the Subnets
The IP Address Plan
Now Clarisa needs to name and define the subnets. The subnet menu items are under the
LAN item in Network Configuration in the WS 2000 left menu. The subnets can be
renamed, assigned an IP address, and have ports associated with them. Before she can do
this, however, Clarisa needs to plan how she is going to assign IP addresses to the subnets
and the devices on them.
Clarisa only has one IP address from corporate for this store. She will use network address
translation (NAT) for all of the devices, making request from those devices look to the
outside world as if they came from the single static IP address that she has. For the devices,
she plans to use IP numbers from the range 192.168.*.*, because IP addresses in that range
are designated for internal use only.
She will assign them as follows:
Subnet IP Address Range
192.168.0.*** POS subnet
192.168.1.*** Printer subnet
192.168.2.*** Cafe Subnet
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 91
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004