LightSpeed Technologies Delta X10 - Manual (Page 23)

LightSPEED Technologies • Wireless Sound Solutions • Toll Free: 1-800-840-3662
21
Wireless Transmitter
Handheld Microphone
Sensitivity Level Sensitivity Level Sensitivity Level Sensitivity Level Sensitivity Level
This function allows the user to set the gain structure of the microphone to best fit the voice level of the person speaking into it.
A person with a very loud, booming voice may want the microphone set to a sensitivity level of 1 or 2. A person with a very soft
voice will be better off with the microphone set to a sensitivity of 3 or 4.
To change the sensitivity setting:
• Press the “UP” button 3 times to get to the Sensitivity Level screen.
• Press and hold the “SET” button until ablinking cursor appears.
• Use the “UP” and “DOWN” arrows to make a selection (1-4).
• Press and hold the “SET” button again until the blinking cursor disappears.
SENS SET
LEVEL [2]
LOCK SET
HM-900
SET
UP DOWN
LOCK
Handheld Microphone
End View
LightSPEED
Operating Instructions O N
Batter Batter Batter Batter Battery T y T y T y T y Type ype ype ype ype
The transmitter will operate with either standard Alkaline Batteries or Nickel Metal Hydride (NiMH) Rechargable Batteries. Since
these types of batteries have different characteristics, it is important to set the transmitter to the appropriate type of battery being
used so that the battery life indicator will operate properly.
Batter Batter Batter Batter Battery Life Indicator y Life Indicator y Life Indicator y Life Indicator y Life Indicator
The battery life is shown on the primary screen of the LCD. The 7-step fuel gauge acts as a detailed guide to show the actual life
of the battery.
CH: 002
NOTE: Do not mix battery types.
WARNING: Do not use NiCad
batteries! They will not charge
properly and may cause damage
to the transmitter.
• Press the “UP” button
twice to get to the
battery-type screen.
• Press and hold the “SET” button until a blinking
cursor appears.
• Use the “UP” and “DOWN” arrows to make a selection.
• Press and hold the “SET” button again until the
blinking cursor disappears.
LOCK SET
HM-900
SET
UP DOWN
LOCK
LOCK SET
HM-900
Rotate Disc to Secure
Controls
Handheld Microphone
End View
NiMH
AKLN
T TT TTo Change the Batter o Change the Batter o Change the Batter o Change the Batter o Change the Battery T y T y T y T y Type Setting: ype Setting: ype Setting: ype Setting: ype Setting: