Wireless transmitter, Controls and functions – LightSpeed Technologies Delta X10 User Manual
Page 8
LightSPEED Technologies • Wireless Sound Solutions • Toll Free: 1-800-840-3662
6
Wireless Transmitter
Belt-pack
DOWN
UP
Set
LightSPEED
On/Off
Switch
Mute
Switch
Red LED
Door
Latch
LCD
Display
10
2
9
1
Battery
Charge
Jack
6
11
9
3
4
Mic
Jack
5
12
GT
MT
Gain
Adjust
8
Battery
Compartment
CH: 001
7
Belt
Clip
BP-900 BEL
BP-900 BEL
BP-900 BEL
BP-900 BEL
BP-900 BELTTTTT-P
-P
-P
-P
-PACK TRANSMITTER CONTROLS and FUNCTIONS
ACK TRANSMITTER CONTROLS and FUNCTIONS
ACK TRANSMITTER CONTROLS and FUNCTIONS
ACK TRANSMITTER CONTROLS and FUNCTIONS
ACK TRANSMITTER CONTROLS and FUNCTIONS
1.
1.
1.
1.
1. Power Button:
Power Button:
Power Button:
Power Button:
Power Button: Turns the transmitter ON. (Hold for two seconds.)
2.
2.
2.
2.
2. LCD Display:
LCD Display:
LCD Display:
LCD Display:
LCD Display: Information screen appears when the power is switched on.
3.
3.
3.
3.
3. Red LED:
Red LED:
Red LED:
Red LED:
Red LED: Lights up briefly when power is switched on, flashes continuously when audio signal is muted.
4.
4.
4.
4.
4. Mute Switch:
Mute Switch:
Mute Switch:
Mute Switch:
Mute Switch:
Turns the audio signal on or off.
The red LED will flash when MUTE is engaged.
5.
5.
5.
5.
5. Microphone Jack:
Microphone Jack:
Microphone Jack:
Microphone Jack:
Microphone Jack:
Microphone connects to transmitter here.
6.
6.
6.
6.
6. Batter
Batter
Batter
Batter
Battery Charge Jack:
y Charge Jack:
y Charge Jack:
y Charge Jack:
y Charge Jack: Optional battery charger plugs in here (for NiMH batteries only).
7.
7.
7.
7.
7. Belt Clip
Belt Clip
Belt Clip
Belt Clip
Belt Clip
8.
8.
8.
8.
8. Gain:
Gain:
Gain:
Gain:
Gain: Provides adjustment for differing voice levels and microphone sensitivities.
9.
9.
9.
9.
9. UP and Down Buttons:
UP and Down Buttons:
UP and Down Buttons:
UP and Down Buttons:
UP and Down Buttons: These buttons scroll up and down between setup screens on the LCD display. They are also used
to enter changes in each setup screen.
10.
10.
10.
10.
10. Set Button:
Set Button:
Set Button:
Set Button:
Set Button: This button is used to enter and save changes to the transmitter settings.
11.
11.
11.
11.
11. Door Latch:
Door Latch:
Door Latch:
Door Latch:
Door Latch: A door latch button is located on each side. Press both to open the battery compartment door.
12.
12.
12.
12.
12. Batter
Batter
Batter
Batter
Battery Compartment
y Compartment
y Compartment
y Compartment
y Compartment
Controls and Functions
LightSPEED