LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 - Manual (Page 149)

135
Configuring the system remotely
Record menu
To configure the record menu:
1 Click REMOTE CONFIG>Record.
2 Configure the following:
• Channel: Select the channel that you want to apply the settings to.
• Record: Select Enable or Disable to start or stop the channel from recording.
• Pack Duration: Select the duration you want each saved file to be (for example, every file can
be 15 minutes long).
• Record Mode: Select from "Time Schedule" recording, or "Continuous" recording. If you select
"Time Schedule", click the Schedule Setup button to configure the recording times.
• Audio: Enable or disable system audio.
• Frame Rate: Select from "Fixed" or "Manual" frame rate.
• Record Setup> Frame Rate:Enter the desired system frame rate.
• Quality: Select the video recording quality. Choose from "Best", "Better" or "Good".
• Resolution: Select the resolution type. Choose from "CIF", "HD1", or "D1".
3 Click Save to apply your settings.
Record