1 click remote config>system>information, 2 the following system information is shown, 1 click the local config tab – LOREX Technology Lorex Digital Video Surveillance Recorder lh1 10 User Manual
Page 160: 3 select the desired directory, and click open, 4 click save to apply your changes, Changing save directories, Information menu
146
Configuring the system remotely
Information Menu
To view your DVR’s system information:
1
Click REMOTE Config>System>Information.
2
The following system information is shown:
• Device Name, Firmware, MAC Version, IP Address, System MAC address, DDNS Name, HDD
(Hard drive capacity), Video type, Net Client Port, Web Port, and Mobile Port.
Changing save directories
You can change where the backup file and screen captures are stored on the local hard
drive.
To change the save directories:
1
Click the LOCAL CONFIG tab.
2
Click the open button beside the appropriate fields:
• Record: Recorded video files are stored here.
• Snapshot: Screen captures are stored here.
• Backup: Backed up video files are stored here.
3
Select the desired directory, and click Open.
4
Click Save to apply your changes.
LOCAL CONFIG
open