Liebert GXTTM - Manual (Page 2)

IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS. THIS MANUAL CONTAINS IMPORTANT
SAFETY INSTRUCTIONS. Read all safety and operating instructions before
operating the Uninterruptible Power System (UPS). Adhere to all warnings on
the unit and in this manual. Follow all operating and user instructions. This
equipment can be operated by individuals without previous training.
2. This product is designed for Commercial/Industrial use only. It is not intended
for use with life support and other designated “critical” devices. Maximum
load must not exceed that shown on the UPS rating label. The UPS is
designed for data processing equipment. If uncertain, consult your dealer.
See Limited Warranty.
3. This UPS is designed for use on a properly earthed (grounded), 208-240
VAC, 50Hz or 60Hz supply, for installation by qualified personnel. A qualified
electrician must review and approve customer supplied wiring, circuit
breakers, intended loads, and verify correct input, output and earth
connections to ensure compliance with technical standards and local
electrical codes of practice. Installation instructions and warning notices only
for use by qualified personnel are located after the UPS operator instructions
in this manual.
WARNING: This UPS should not be supplied from electrical power systems
of the “IT” (Impédance à Terre) type. (IEC 364-ELECTRICAL INSTALLATION
OF BUILDINGS)
4. ELECTROMAGNETIC COMPATIBILITY- This UPS complies with the
requirements of the EMC Directive 89/336/EEC and the published technical
standards. Continued compliance requires installation in accordance with
these instructions and the use of manufacturer approved accessories only.
WARNING: This is a CLASS A – Uninterruptible Power System Product. In a
domestic environment, this may cause radio interference, in which case the
user may be required to take additional measures.
5. Operate the UPS in an indoor environment only in an ambient temperature
range of 0°C to +40°C (32°F to +104°F). Install it in a clean environment, free
from moisture, flammable liquids, gasses, or corrosive substances.
6. This UPS contains no user serviceable parts. The UPS ON/OFF pushbuttons
do not electrically isolate internal parts. Under no circumstances attempt to
gain access internally, due to the risk of electric shock or burn.
Do not continue to use the UPS if the front panel indications are not in
accordance with these operating instructions, or the UPS performance alters
in use. Refer all faults to your dealer.
7. Only trained engineers authorised by Liebert should perform troubleshooting.
To replace batteries, refer all servicing to qualified service personnel.
PROPER DISPOSAL OF BATTERIES IS REQUIRED. REFER TO YOUR
LOCAL LAWS AND REGULATIONS FOR DISPOSAL REQUIREMENTS.
8. Never block or insert any object into the ventilation holes or other openings.
9. DO NOT CONNECT equipment that could overload the UPS or demand DC
current from the UPS, for example: electric drills, vacuum cleaners, laser
printers, hairdryers or any appliance using half wave rectification.