Lanzar Car Audio Lanzar Vibe VBD500 - Manual (Page 10)

CD OPERATION
• SELECT TRACKS
Press MAN/SEK button (17) or (18) to move to the previous track or the
following track. Track number shows on display.
Hold MAN/SEK button (17) or (18) to fast reverse or fast forward. CD play
starts from when you release the button.
• STOP PLAYING
Press PAU button (21) to pause CD player. Press it again to resume play.
• REPEAT THE SAME TRACK
Press RPT button (23) to continuously repeat the same track.
Press again to stop repeat.
• PREVIEW ALL TRACKS
Press SCN button (22) to play first several seconds of each track on the current
disc. Press again to stop intro and listen to track.
• PLAY ALL TRACKS IN RANDOM
Press SHF button (24) to play all tracks on CD in random order. Press again to
cancel the function.
• EJECT
Press EJECT button (4) to stop CD play and eject the disc from the slot.
NOTE ON CD-R/CD-RW DISCS
• On this unit, in addition to an audio CD, you can play your original CD-R or CD-RW
that contain audio titles.
• However, depending on the conditions of the recording equipment or the
CD-R/CD-RW disc itself, some CD-Rs or CD-RWs cannot be played on this
unit.
• DO NOT stick paper or tape, etc. onto the label side or the recording side of any
CD-R/CD-RW, as it may cause a malfunction.
10