Lanzar Car Audio Lanzar Vibe VBD500 User Manual

Page 8

Advertising
background image

8

• SOUND ADJUSTMENT

Press SEL button (11) to select the desired adjustment mode. The adjustment
mode will change in the following order:

By pressing VOLUME button (12) or VOLUME button (13), it is possible to
adjust the desired sound quality.

• LOUDNESS

Press LOU/BND button (14) for several seconds to reinforce the bass output and
display will show “LOUD”. Press it for several seconds again to release this function.

• SET THE CLOCK

Holding down the DSP button (16) until the clock is shown on the LCD display and
flashed. Then press the MAN/SEK button (18) to change hours or MAN/SEK

button (17) to change minutes.

• SELECT MODE

Press MOD button (6) to choose desired listening mode.
(e.g. radio mode to CD mode)

• SUBWOOFER

Press MOD/SW button (6) for several seconds to toggle subwoofer output. When subwoofer
on, display will show “ SW”. Press it again for several seconds to release this
mode.

• MUTE

Press MUT button (10) to silence the receiver. Press it again to resume listening.

• LIQUID CRYSTAL DISPLAY

Exhibit current frequency and activated functions on the display (8).

• EQUALIZATION

Press EQ button (20) to turn on equalization function and to select desired audio
mode. There are five kinds of mode as below:

• REMOTE SENSOR

Point the remote control handset to the remote sensor IR-sensor (26).
Press the function keys on the handset to control the system.

• FLASHING LED

If the front panel does not install in the unit, the LED (25) will be flashing.

• RESET

Reset button (27) is placed on the front panel and must be activated with either a
ball point pen or thin metal object. The reset button is to be activated for the
following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: If press RESET button (27), the unit can’t work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.

Volume

Bass

Treble

Balance

Fader

FLAT

CLASSICS

POP M

ROCK M

DSP OFF

Advertising