Lucent Technologies DEFINITY EXTENDER 1100 - Manual (Page 52)

Configuration
2-14 Issue 1 June 1998
4. Type your system administrator password (the default is
00000000) and press Enter.
The Password Menu is displayed.
5. Do one of the following:
To check a password:
1. Select Display Password from the Password Menu, and
press Enter.
The system prompts you to enter the user’s two-digit user
number.
2. Type the user’s two-digit user number, and press Enter.
The user number and the password assigned are
displayed.
NOTE:
You cannot display the Administrator Password (user 00).
“Admin Password Display Denied” is displayed if user 00
is selected.
To change a password:
1. Select Change Password from the Password Menu, and
press Enter.
The system prompts you to enter the new password.
2. Enter the new password (8 to 10 digits), beginning with
the remote user’s two-digit code, and press Enter.
3. Repeat for each password you change.