Lucent Technologies DEFINITY EXTENDER 1100 - Manual (Page 63)

Installation
3-8 Issue 1 June 1998
The data settings for the Switch Module’s COM port and the
Remote Module’s COM port must be the same. The factory
settings of the Switch Module’s COM port are the following:
Data rate – 38.4 kbps
Data bits – 8
Parity – None
Stop bits - 1
NOTE:
For more information on RS-232D, please refer to the Glossary.
Female Connector on Module
DCD 1
DSR 6
CTS 8
DTR 4
RXO 2
TXI 3
GND 5
RTS 7
Figure 3-2. RS-232D Cable Pin Connections