LevelOne WPC-0100 - Manual (Page 30)

26
If any of these items are missing, please follow the instructions below to install them
properly:
Set up the Network Protocols :
•
Click “ Add “ and select “ Protocol “ on Network “ Configuration “.
•
Click “ Add “ and then choose the network protocol. Select Microsoft as the
manufacturer and “ NetBEUI “, “ TCP/IP “, and “ IPX/SPX-compatible “ for the
network protocols. Then click “ OK; “
•
Now your network protocol should be set. Please check if your network needs any
special requirements to operate in your office environment.
Network Service for Microsoft Networking:
•
Click “ Add “ and select “ Service “.