LevelOne WPC-0100 - Manual (Page 31)

27
•
Select “ Microsoft “as the manufacturer and choose “ File and printer sharing for
Microsoft Networks “ for network service;
•
Click “ OK “ to set the network service.
4.3 Others
Wired Equivalent Privacy (WEP)
If you set the WEP Pass phrase, which is the same as the Access Point (AP) in your
LevelOne 11Mbps Wireless PCMCIA Adapter, but still can’t connect with the AP. It
may be that the key generated by your PC card is different from the key generated by
the AP even if the same Pass phrase is used between your PC card and AP. Please
follow the steps below to set WEP manually.
1. Check the WEP type and WEP key generated from the AP.
2. Select “ Manual “ on Wired Equivalent Privacy in your IEEE 802.11b Utility
advanced setting.
3. Type a set of WEP key generated from the AP into the key1blank of your
Encryption frame, other space you can type anything you like, but make sure all
the blanks will be filled.
4. Remember to press the “ Write “ button and “ OK “ to finish the WEP setting.
Additional Note for Windows 98 earlier edition
If your system is running Windows 98 first edition, you may use one of the following
ways to make IEEE 802.11b WLAN Utility work properly.
1. Copy and replace the file MFC42.dll from c:\windows\system of Windows 98SE to
the same directory of your Windows 98 first edition.
2. Upgrade your system and IE from Microsoft web site.