Roubleshooting, Led i – LevelOne WBR-6005 User Manual
Page 106
D
IAGNOSING
LED I
NDICATORS
Table 4: LED Indicators
◆
Power/LAN LEDs are off
The AC power adapter may be disconnected. Check
connections between the Wireless Router, the power adapter,
and the wall outlet.
◆
WLAN LED is off
The access point radio has been disabled through it‘s web
management interface. Access the management interface
using a web browser to enable the radio.
◆
◆
LAN LEDs are off
(when port connected)
Verify that the Wireless Router is powered on.
Be sure cables are plugged into both the Wireless Router and
corresponding PC.
Verify that the proper cable type is used and its length does
not exceed specified limits.
Check the cable connections for possible defects. Replace the
defective cable if necessary.
◆
◆
◆
WAN LED is off
There is no detected signal from WAN port. Check
connections and the management interface.
I
F
Y
OU
C
ANNOT
C
ONNECT TO THE
I
NTERNET
Check the following items:
◆
Check that your computer is properly configured for TCP/IP.
◆
Make sure the correct network adapter driver is installed for your PC
operating system. If necessary, try reinstalling the driver.
◆
Check that the network adapter‘s speed or duplex mode has not been
configured manually. We recommend setting the adapter to auto-
negotiation when installing the network driver.
– 106 –
Symptom
Action
A
T
ROUBLESHOOTING