LevelOne WBR-6005 - Manual (Page 42)

◆ Security Mode — Specifies the security mode for the SSID. Select the
security method and then configure the required parameters. For more
information, see ―WLAN Security‖ on page 73 . (Options: Disabled,
Open, Shared, WEP-AUTO, WPA-PSK, WPA2-PSK, WPA-PSK_WPA2-PSK,
WPA, WPA2, WPA1_WPA2, 802.1X; Default: Disabled)
N OTE :
To keep your wireless network protected and secure, you should
implement the highest security possible. For small networks, it is
recommended to select WPA2-PSK using AES encryption as the most
secure option. However, if you have older wireless devices in the network
that do not support AES encryption, select TKIP as the encryption
algorithm.
◆ Access Policy — The Wireless Router provides a MAC address filtering
facility. The access policy can be set to allow or reject specific station
MAC addresses. This feature can be used to connect known wireless
devices that may not be able to support the configured security mode.
◆ Add a station MAC — Enter the MAC address of the station that you
want to filter. MAC addresses must be entered in the format
xx:xx:xx:xx:xx:xx.
C OMPLETION
After completion of the Wizard, the screen returns to the Home Page.
– 42 –
C HAPTER 4 | Initial Configuration
Setup Wizard