LevelOne WBR-6005 - Manual (Page 29)

4. Set up wireless devices by pressing the WPS button on the Wireless
Router or by using the web interface.
See ―Initial Configuration‖ on
page 31 for more information on accessing the web interface.
B RIDGE M ODE C ONNECTIONS
In Bridge Mode, the Wireless Router operates as a wireless access point,
extending a local wired network to associated wireless clients (PCs or
notebooks with wireless capability). From any nearby location, you can
then make a wireless connection to the Wireless Router and access the
wired network resources, including local servers and the Internet.
In Bridge Mode, the Wireless Router does not support gateway functions on
its WAN port. Both the LAN port and the WAN ports can be connected to a
local Ethernet LAN.
N OTE :
Bridge Mode is not the factory default mode and must be manually
set using the web management interface.
Figure 10: Bridge Mode Connection
4. Set up wireless
devices
Notebook PC
2. Connect AC power
adapter to power source
1. Connect LAN and WAN ports
to PCs or an Ethernet LAN switch
3. Connect LAN port
to PC
To connect the Wireless Router for use as an access point, follow these
steps:
1. Using Ethernet cable connect the Wireless Router‘s LAN and WAN ports
to PCs or a LAN switch.
2.
Power on the Wireless Router by connecting the AC power adapter and
plugging it into a power source.
C AUTION :
Use ONLY the power adapter supplied with the Wireless Router.
Otherwise, the product may be damaged.
– 29 –
C HAPTER 3 | Installing the Wireless Router
Bridge Mode Connections