Lindy 32251 User Manual
Page 26
CPU Switch Smart SUN-MAC-PCInstallation and Use
Page 19
T5 - 15 seconds autoscan delay time before switching to next port
T6 - 20 seconds autoscan delay time before switching to next port
T7 - 30 seconds autoscan delay time before switching to next port
T8 - 60 seconds autoscan delay time before switching to next port
U1 - CPU Switch Smart SUN-MAC-PC channels are switchable using a 3 button
mouse or IntelliMouse (default)
(CPU Switch Smart SUN-MAC-PC reports 2 button mouse mode to PCs)
U2 - CPU Switch Smart SUN-MAC-PC channels are not switchable using 3 button
mouse or IntelliMouse
(CPU Switch Smart SUN-MAC-PC reports 2 button mouse mode to PCs)
U3 - CPU Switch Smart SUN-MAC-PC channels are not switchable using 3
mouse or IntelliMouse
(CPU Switch Smart SUN-MAC-PC reports 3 button mouse mode to PCs)
U4 - CPU Switch Smart SUN-MAC-PC channels are switchable using 3 button
mouse or IntelliMouse
(CPU Switch Smart SUN-MAC-PC reports IntelliMouse mode to PCs)
U5 - CPU Switch Smart SUN-MAC-PC channels are not switchable using 3 button
mouse or IntelliMouse
(CPU Switch Smart SUN-MAC-PC reports IntelliMouse mode to PCs)
U7 – Cycle between all ports when switching with ‘Hotkeys + Tab’ or three button
mouse (default)
U8 – Cycle between active ports only when switching with ‘Hotkeys + Tab’ or three
button mouse
H1 - Hotkey combination is CTRL + ALT + command key (default)
H2 - Hotkey combination is CTRL + SHIFT + command key
H3 - Hotkey combination is ALT + SHIFT + command key
H4 - Hotkey combination is RIGHT ALT + command key
H5 - Hotkey combination is LEFT ALT + RIGHT ALT + command key
H6 - Hotkey combination is LEFT CTRL + LEFT ALT + command key
H7 - Hotkey combination is RIGHT CTRL + RIGHT ALT + command key
H8 - No hotkey combination enabled
F1 - Display firmware first digit
(Note: F1 is
F
F
followed by
1
1
NOT
l
l
)
F2 - Display firmware second digit
F3 - Display firmware third digit
F5 - Restore PS/2 mouse function
F6 - Restore IntelliMouse function
F8 - RESET all configurations to default settings. (Display confirms with 'r').