Lindy 32251 User Manual
Page 30
CPU Switch Smart SUN-MAC-PCInstallation and Use
Page 23
5) Test the mouse movement by moving the mouse a short distance.
F5 - Restore PS/2 mouse function
F6 - Restore IntelliMouse function
2.12 Upgrading the CPU Switch Smart's flash memory
The CPU Switch Smart SUN-MAC-PC uses flash memory technology which enables
the firmware code to be upgraded by the user. Upgrades are performed by
connecting a PC's serial port to the CPU Switch Smart's options port and running an
upgrade program on the PC. This upgrade program downloads the new firmware to
the CPU Switch Smart and checks that the data has been programmed correctly.
To perform a firmware upgrade on your CPU Switch Smart SUN-MAC-PC you will
need a suitable serial upgrade cable and an IBM PC compatible computer with an
RS232 serial port and an operating system that supports DOS. Upgrade cables may
be purchased from LINDY Electronics or may be made using the wiring specification
given in Appendix A4. You will also need to download the latest version of the CPU
Switch Smart SUN-MAC-PC firmware which is available free of charge at
www.LINDY.com.
To perform a flash upgrade on the CPU Switch Smart SUN-MAC-PC:
Step 1 - Connect your computer to the CPU Switch Smart
Connect your computer's serial port to the CPU Switch Smart SUN-MAC-PC's
options port (labelled OPTIONS/FLASH).
Step 2 - Reset the CPU Switch Smart SUN-MAC-PC whilst holding down the
front panel key
The CPU Switch Smart SUN-MAC-PC may be reset by powering it off and then on
again. Remember that the CPU Switch Smart SUN-MAC-PC draws its power from
any of the connected computers so you will need to power down or disconnect all
the computers to power down the CPU Switch Smart. Alternatively you may reset
the CPU Switch Smart by inserting a small blunt object, such as the nib of a ball
point pen, into the small hole located on the underside of the CPU Switch Smart
(see figure 4). Hold down the front panel key BEFORE the CPU Switch Smart is
reset and keep it held down until the CPU Switch Smart has powered on and
displays 'u'.