Paralan iS550 User Manual
Page 28
Page 28
5. CONFIGURING THROUGH WEB-BASED UTILITY
5.1 General. Paralan’s iSCSI Bridge Web-based Utility configures the unit for many
different environments and applications; monitors boot status and updates
firmware. Please note that your unit’s serial number is depicted at the upper right
hand corner of each web page of the utility.
5.1.2 UNIT MUST BE FULLY BOOTED BEFORE CHANGES TO THE
WEB-BASED UTILITY CAN BE MADE! The unit is considered fully
booted when the “Status” LED is solid green.
5.1.3 FOR ANY CHANGE TO TAKE EFFECT, THE UNIT MUST BE
REBOOTED!
5.2 Admin Page. The first thing you should do after you’ve accessed the Web-based
Utility, is click on the Admin page and change your User Name and Password.
This will give your system an added level of security. The Admin page also
allows you to change your hardware MAC address. Lastly, this page allows you
to update the firmware of the unit (please refer to the “Updating Firmware”
section 5.7).
WARNING! For changes to the User Name, Password and MAC address to
take affect, you will need to click the associated submit button and confirm
changes. A full reboot of the unit is the final step necessary to make the
modifications permanent.