Paralan iS550 User Manual
Page 34
Page 34
5.6.1.2 Mutual CHAP. Mutual CHAP sets a Secret for both the Target (iS5xx
iSCSI Bridge) and Initiator. You must choose “CHAP” on the
“Authentication Method” pull-down menu before you can enable
“Mutual” CHAP in the “CHAP Direction” pull-down menu. Once you
have done so, you can specify both a Target and Initiator “Username”
and “Usersecret”. Ensure that your iSCSI Intiator is correctly
configured for authentication. Please see the Glossary for further
information.
WARNING! For changes to this page to take affect, you will need to click
the submit button and confirm changes. A full reboot of the unit is the final step
necessary to make the modifications permanent. Before changing the settings on
this page:
5.6.2 If you are using a firewall, make certain that the iSCSI Protocol port you
entered is open.
5.6.3 Confirm that your management computer is on the same subnet and that
the IP Address you’ve entered is not a duplicate on your network.