Phonetics Boat Remote - Manual (Page 25)

Chapter 3: Programming
25
CHAPTER 3:
PROGRAMMING
T his chapter describes use of the keypad and explains the
keypad commands for programming the Boat Remote. You will
learn how to program Voice Messages, System Parameters, Phone
Parameters, and Input Alarm Parameters.
Using the Keypad, LCD and LED Indicators
The keypad is used to program and access information from the
Boat Remote. All programming is accomplished using simple key
sequences and entering information with the number keys. Moving
through menu options is performed with the arrow keys. To change a
parameter, enter the new value and press the
ENTER
key.
The LCD, liquid crystal display, indicates which menu option has
been selected and the current selected parameter.
The two LED’s are used to indicate the system operating mode and
alarm status of the Boat Remote. The MODE LED indicates the
system operating mode of the Boat Remote. The WARNING LED
alerts you if there is a problem with the phone line, AC power or if an
alarm exists. The following describes the LED indicators:
MODE LED - GREEN WARNING LED - RED
Off = Stand-By Mode Off = Everything OK
Blinking = On-board Mode Blinking = Unacknowledged
On Steady = Away Mode Alarm Exists
On Steady = AC Power Off or
Phone Line Disconnected
Fig. 3.1 The Keypad