Phonetics Boat Remote - Manual (Page 53)

Chapter 3: Programming
53
Emergency High Water Level Input
The High Water Level Input will monitor the open or closed status of
a float switch. To program the Emergency High Water Level Input,
follow these steps.
Press
SET
.
Press
HIGH WATER
.
Using the number keys on the keypad enter the Alarm Recognition
Time, minutes and seconds. The range is from 1 second to 999
minutes 59 seconds. The default is 5 minutes.
Use the number keys to enter minutes.
Press
ENTER
.
Repeat for seconds.
The Input Mode will be displayed. The default is Active. Press the
MODE
key on the keypad until the appropriate mode is shown on the
display.
Press the
MODE
key to toggle through the three input modes.