Polycom 3725-32870-002 - Manual (Page 36)

Chapter 4 – Administrator Configuration
4-6
To edit or delete a created channel:
1 Click VRR>Channels in the menu bar at the top of the page.
2 Click the channel entry to be edited in the channel list.
3 In the ACTIONS area on the left side of the page, click Edit or Delete to
modify or delete the channel.
Once a channel is deleted, VRRs belonging to that channel are automatically changed
to belong to the default channel.
Recording Setting
Recording Setting page provides supplementary settings for recording. You
may need to configure these options, if needed.
To configure recording setting options:
1 Click System Config>Recording Setting in the menu bar at the top of
the page.
2 On Recording Setting page, configure the following parameters:
Table 4-3 Defining Recording Setting Parameters
Parameter Description
Continue
recording if no
resource for live
streaming
If this option is selected, the system which is in live streaming
mode will automatically switch to recording mode in case of
insufficient resources. In this case, you cannot continue to view
the video in real time through the Web. However, you can play
back the video once recording and format conversion are
completed by the system. If deselected, the system will reject
all live streaming requests when there is no live streaming
resource.
Enable 1080p
H.323 recording
with live streaming
Specifies whether to enable the 1080p capability of the system
for recording with live streaming.
Restrict to CIF/SIF
resolution
If this option is selected, the system will record the video at
CIF/SIF resolution regardless what parameters are specified in
the recording template and what the capacity of the endpoint.
Selection of this option will disable the Enable 1080p H.323
recording with live streaming option.
FF/RW interval
Specifies the fast forward/backward intervals when playing
back recorded files on an endpoint. For example, if it is set to 1
minute, the system will set one node every minute when
recording. When pressing the Fast forward button, the video
playback will jump to the nearest node content from the current
location.
3 Click the Update button.