Polycom 3725-32870-002 - Manual (Page 60)

Chapter 4 – Administrator Configuration
4-30
Parameter Description
Max Recording Ports
The maximum number of recordings ports supported by
the system.
Max Live Steaming
Ports
The maximum number of live streaming ports supported by
the system.
Max RTSP Sessions
The maximum number of Web video-on-demand
supported by the system. Reach up to 200.
Encryption
Indicates whether the AES encryption function of the
device is activated. This is a free option, but limited to only
countries. You can only use it after obtaining the License
and activating it. When the encryption function is activated,
displays, and otherwise displays.
HD Live Streaming
Indicates whether the high resolution live streaming
function of the device is activated. This is a charged
function. You can only use it after purchasing the License
and activating it. Once this function is activated, the device
can live stream 720p resolution videos. This license also
increases the Web streaming capacity from 100 to 200
simultaneous unicast connections.
You may enter the obtained activation key in the Activation Key text box of
the page, and click Update to activate Polycom® RSS™ 4000 system or
charged functions. Click Polycom Resource Center link to enter the Polycom
Resource Center and obtain the activation key.
UI Customization
Polycom® RSS™ 4000 system IVR information, Web Management interface
Logo, endpoint interface language, background picture and system name
can be customized to meet your organization needs.
Click Admin>UI Customization in the menu bar at the top of the page to
enter the UI Customization page.
IVR Customization
Polycom® RSS™ 4000 provides Interactive Voice Response (IVR) service.
After the endpoint dials the Polycom® RSS™ 4000 system and gets
connected, you can hear different IVR voice prompts when you receive the
endpoint menu from the operation system.
To customize the IVR information:
1 Click Admin>UI Customization in the menu bar at the top of the page.
2 Select the IVR information to be replaced and corresponding language
option in Select IVR Message to Play in the IVR Message area.
3 Click Open to select the audio file to be uploaded.
The audio file to be uploaded must be in PCM format, and the sampling
frequency must be 16 or 32 KHz, 16bit, and stereo or mono.
4 Click Upload to upload the audio file.
After the file is uploaded successfully, you can click the corresponding
Play/Stop button
to test and play the prompt voice and verify if the
file replacement is successful.