Kirk repeater, Kirk handset, Auto login and handover – Polycom VoiceStation 300 User Manual

Page 10: Kirk sio application interface, Kirk maintenance software, Kirk repeater –3 kirk handset –3, Auto login and handover –3

Advertising
background image

Introduction to KIRK Wireless Server 300

2–3

KIRK Repeater

The repeater can be used to extend the coverage area in a wireless solution.
Depending on the repeater type, it can be mounted either on the wall or on the
ceiling. The wireless repeater is used in areas with limited voice traffic, where
cabling is difficult. The repeater does not increase the number of traffic
channels, but increases the coverage area established with the base station. The
use of repeaters is optional.

KIRK Handset

The handset is a lightweight, ergonomically designed wireless unit that
includes an LCD display and keypad. It is a portable unit compatible with
DECT GAP standard, and it is designed to provide the subscriber with most of
the features available for a wired phone, in addition to its roaming and hand
over capabilities.

The KWS300 supports up to 12 registered handsets.

Auto Login and Handover

Auto login refers to the ability to log on to more than one system, enabling you
to use the same handset on up to 10 different systems.Auto Login type B is
used if a handset is subscribed to two systems only. Auto Login B can be used
in separate systems which are overlapping each other.

KIRK SIO Application Interface

The SIO Application Interface is a communication platform allowing text
messaging between the wireless server and a handset. With the SIO API,
which is a fundamental part of all our solutions and a third party application
program, the customer is offered a wide range of usage opportunities in a
variety of vertical markets. For more information about this feature, please
download the KIRK SIO Application Interface brochure at www.polycom.com.

KIRK Maintenance Software

The following software application for the installation and maintenance of the
KWS300 Solution is provided:

ServiceTool. The service tool is used for programming the repeater,
adjustment of the handset and software download to repeater/handset.

The ServiceTool application can be downloaded at www.polycom.com.

Note

The ServiceTool is not used for adjustment of the KIRK 50xx Handsets.

Advertising
This manual is related to the following products: