Polycom VoiceStation 300 - Manual (Page 25)

Configuring KIRK Wireless Server 300
4–8
Field Explanation Required Optional
Transport
UDP only: To be selected if SIP signalling is
sent through UDP, and only simple DNS is
used for resolving IP addresses.
DNS SRV:
To be selected if SIP signalling is
sent through UDP, and DNS SRV is used for
resolving IP addresses.
x
Default
Domain
Enter the name of the domain.
Note: If no user specific domain is configured,
the handsets registered on the KWS300 will use
the default domain as the domain part of the
SIP URI; e.g. John Doe
<sip:[email protected]
x
Proxy
‘Enter SIP proxy.
Note: The proxy is the SIP URI of the
SIP-proxy. The KWS300 will route all outgoing
SIP signalling to the proxy, e.g. SIP
registrations and outgoing calls.
x
Registra-
tion
Expire
(sec) Enter the number of seconds before a SIP
registration will be renewed. The default value
is 3600
x
Max
Forwards The maximum number of times SIP messages
can be forwarded. The default value is 70.
x
SIP type
of
Service Defines IP type of service used for SIP
messages. The default setting is Nothing.
x
SIP Configuration - Authentication
Default
User Default user name used for SIP authentication. x
Default
Password
Enter password.
Note: If no handset specific authentication user
name/password is configured, handsets
registered on the KWS300 will use the default
user name/password for authentication. x
SIP Configuration - DTMF Signalling
Send as
RTP
Enable the check box (Real-Time Transport
Protocol), if you want the keypad signalling
sent as RTP packets with DTMF code.
x
Send as
SIP
Info Enable the check box, if you want the keypad
signalling sent as SIP INFO
x
Table 4-4 SIP Configuration